How to adjust the tightness of the steering column plunger?
Published Time：
2025/06/16
Adjusting the tightness of the angle gear piston is a crucial step in ensuring its proper functioning. Below are the detailed steps for adjusting the tightness of the angle gear piston:
Tools Required:
Specialized Tool: A specialized tool designed for removing and securing bolts.
Grease: Used to lubricate the inside of the steering gear to reduce issues such as heavy steering and poor return.
Cleaner and Lubricant: Used to clean the steering tie rod ball joint.
Disassembly and Cleaning:
Remove the dust cover and clean and lubricate the steering tie rod ball joint. This helps reduce wear and friction, improving the performance of the steering gear.
Clean the inside of the steering gear, removing dust and dirt.
Adjusting Piston Tightness:
Locate the adjustment bolt at the rear of the steering gear. Use a specialized tool to remove the lock nut and bolt to remove the internal tension piston.
Adjust the tightness of the piston appropriately. This can be done by rotating the adjustment bolt. Generally, rotating the bolt clockwise increases the piston tension, while counter-clockwise rotation decreases the tension.
During adjustment, be careful not to over-tighten or loosen the bolt, as this may damage the steering gear or cause unstable steering.
Lubrication and Installation:
Apply an appropriate amount of grease to the inside of the steering gear to reduce friction and wear. However, do not apply too much, as this may affect the steering return.
Install the tension piston and securing bolt, and use a specialized tool to tighten the lock nut into place.
Install the dust cover to protect the steering tie rod ball joint from dust and dirt.
Testing and Adjustment:
After completing the adjustment, conduct a road test. Drive the vehicle and feel the steering gear's response and return speed.
If the steering gear still has poor return or heavy steering, the piston tightness may need to be readjusted or further repairs may be necessary.
Precautions:
Before adjusting the piston tightness, ensure the vehicle is in a safe state and the engine is turned off.
Be careful during the adjustment process to avoid damaging the steering gear or other components.
More News
Exploring the mysteries and applications of powder metallurgy
Gain a deep understanding of the principles, development history, and important applications of powder metallurgy in modern industry.
2025-07-30
Characteristics of automotive angle steering gear
The steering gear consists of a housing, bearings, a bevel gear, and a gear shaft. Its features include: double-layer bearings are set above the bevel gear, tightened onto the upper part of the housing using a clamping sleeve; a double-lip oil seal is embedded in the clamping sleeve, and a dust cover is provided between the clamping sleeve and the top of the housing.
2025-06-16
The connection method between the steering gear and the steering wheel
The connection method between the steering gear and the steering wheel plays a crucial role in the vehicle's steering system, ensuring that the driver can effectively control the vehicle's direction by operating the steering wheel.
2025-06-16
Contact Information
Tel: 0086-513-82738666
Fax: 0086-513-82603065
Mobile: 86-15262832111
Email: hy@clpm.cn
Address: Changle Industrial Park, Haimen District, Nantong City, Jiangsu Province
Website QR Code
Copyright © 2025 Nantong Wangxin New Materials Co., Ltd. Powered by 300.cn | TAGS
Products cover industries such as automobiles, power tools, textile machinery and household appliances, and are exported to Japan, Europe, the United States, Canada, Southeast Asia and other regions.
- All
- Product Management
- News
- Introduction
- Corporate Outlets
- FAQ
- Corporate Video
- Corporate Brochure